Aprilia Leonardo 150 Battery

The Aprilia Leonardo 150 (150cc) takes a YT12CL battery, about 165 CCA and 12 Ah. It is a conventional (flooded, serviceable), and a lithium drop-in fits the same case.

Shop the YT12CL Amazon · we may earn a commission, at no extra cost to you

Key takeaways

  • Battery: YT12CL (also sold as YB12AL-A).
  • Conventional (flooded, serviceable), around 165 CCA, 12 Ah.
  • Lithium drop-in fits the same YT12CL case - lighter, longer-lived, needs a lithium charger.
  • Covers 2000-2002.
Battery SizeYT12CLalso sold as YB12AL-AThe case-size code that sets the physical fit, terminal layout, and capacity.Verified fit
Chemistry (OEM)
Conventional (flooded, serviceable)
Cold cranking amps (CCA)
165
Capacity
12 Ah
Engine
150cc
Fits model years
2000-2002
Verified fitLast checked
Reviewed by the CrankDex editorial team against manufacturer and retailer fitment data.

The Aprilia Leonardo 150 uses a YT12CL - conventional (flooded, serviceable). Around 165 CCA of cold-start current. Meeting or beating the OEM rating is fine; going under it can cause hard starts in the cold. About 12 Ah of capacity - the reserve that runs lights and electronics with the engine off.

AGM is the safe like-for-like: cheapest, tolerant of standard chargers and trickle tenders, and heavier. Lithium (LiFePO4) drop-ins in the same case size cut weight by roughly 60-70%, hold voltage better, and self-discharge far slower - but they cost more and need a lithium-aware charger, not an old lead-acid trickle charger.

Buy the battery for your Aprilia Leonardo 150

AGM is the safe like-for-like: cheapest, tolerant of standard chargers and trickle tenders, and heavier. Lithium (LiFePO4) drop-ins in the same case size cut weight by roughly 60-70%, hold voltage better, and self-discharge far slower - but they cost more and need a lithium-aware charger, not an old lead-acid trickle charger.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Installing it

Disconnect the negative (-) terminal first and reconnect it last. Powersports batteries are small and light, so this is usually a 10-15 minute job with a couple of hand tools.

Frequently asked

What battery does a Aprilia Leonardo 150 take?

The Aprilia Leonardo 150 takes a YT12CL battery (also sold as YB12AL-A), a conventional (flooded, serviceable) rated around 165 CCA and 12 Ah.

Is the YT12CL an AGM or lithium battery?

Conventional (flooded, serviceable). You can also fit a LiFePO4 lithium drop-in in the same YT12CL case size for less weight and longer life - just use a lithium-aware charger.

How many cold cranking amps (CCA) does it need?

Around 165 CCA of cold-start current. Meeting or beating the OEM rating is fine; going under it can cause hard starts in the cold.

Can I put a lithium battery in a Aprilia Leonardo 150?

Yes. Lithium (LiFePO4) drop-ins are made in the same YT12CL case size, so they fit the tray and terminals. They weigh far less and last longer, but need a lithium-compatible charger rather than an old lead-acid trickle charger.

How do I change the battery on a Aprilia Leonardo 150?

Disconnect the negative (-) terminal first and reconnect it last. Powersports batteries are small and light, so this is usually a 10-15 minute job with a couple of hand tools.

More parts for your Aprilia Leonardo 150

We cover the other consumables for your machine too - the exact fit, cited, in one place.

More Aprilia batteries