Polaris Ranger 6x6 4x4 Battery

The Polaris Ranger 6x6 4x4 (500cc) takes a YB30CL-B battery, about 400 CCA and 30 Ah. It is a conventional (flooded, serviceable), and a lithium drop-in fits the same case.

Shop the YB30CL-B Amazon · we may earn a commission, at no extra cost to you

Key takeaways

  • Battery: YB30CL-B.
  • Conventional (flooded, serviceable), around 400 CCA, 30 Ah.
  • Lithium drop-in fits the same YB30CL-B case - lighter, longer-lived, needs a lithium charger.
  • Covers 1998-2004.
Battery SizeYB30CL-BThe case-size code that sets the physical fit, terminal layout, and capacity.Verified fit
Chemistry (OEM)
Conventional (flooded, serviceable)
Cold cranking amps (CCA)
400
Capacity
30 Ah
Engine
500cc
Fits model years
1998-2004
Verified fitLast checked
Reviewed by the CrankDex editorial team against manufacturer and retailer fitment data.

The Polaris Ranger 6x6 4x4 uses a YB30CL-B - conventional (flooded, serviceable). Around 400 CCA of cold-start current. Meeting or beating the OEM rating is fine; going under it can cause hard starts in the cold. About 30 Ah of capacity - the reserve that runs lights and electronics with the engine off.

AGM is the safe like-for-like: cheapest, tolerant of standard chargers and trickle tenders, and heavier. Lithium (LiFePO4) drop-ins in the same case size cut weight by roughly 60-70%, hold voltage better, and self-discharge far slower - but they cost more and need a lithium-aware charger, not an old lead-acid trickle charger.

Buy the battery for your Polaris Ranger 6x6 4x4

AGM is the safe like-for-like: cheapest, tolerant of standard chargers and trickle tenders, and heavier. Lithium (LiFePO4) drop-ins in the same case size cut weight by roughly 60-70%, hold voltage better, and self-discharge far slower - but they cost more and need a lithium-aware charger, not an old lead-acid trickle charger.

As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Installing it

Disconnect the negative (-) terminal first and reconnect it last. Powersports batteries are small and light, so this is usually a 10-15 minute job with a couple of hand tools.

Frequently asked

What battery does a Polaris Ranger 6x6 4x4 take?

The Polaris Ranger 6x6 4x4 takes a YB30CL-B battery, a conventional (flooded, serviceable) rated around 400 CCA and 30 Ah.

Is the YB30CL-B an AGM or lithium battery?

Conventional (flooded, serviceable). You can also fit a LiFePO4 lithium drop-in in the same YB30CL-B case size for less weight and longer life - just use a lithium-aware charger.

How many cold cranking amps (CCA) does it need?

Around 400 CCA of cold-start current. Meeting or beating the OEM rating is fine; going under it can cause hard starts in the cold.

Can I put a lithium battery in a Polaris Ranger 6x6 4x4?

Yes. Lithium (LiFePO4) drop-ins are made in the same YB30CL-B case size, so they fit the tray and terminals. They weigh far less and last longer, but need a lithium-compatible charger rather than an old lead-acid trickle charger.

How do I change the battery on a Polaris Ranger 6x6 4x4?

Disconnect the negative (-) terminal first and reconnect it last. Powersports batteries are small and light, so this is usually a 10-15 minute job with a couple of hand tools.

More parts for your Polaris Ranger 6x6 4x4

We cover the other consumables for your machine too - the exact fit, cited, in one place.

More Polaris batteries