Yamaha YA6 Battery
The Yamaha YA6 (125cc) takes a YT10L battery, about 160 CCA and 11 Ah. It is a conventional (flooded, serviceable), and a lithium drop-in fits the same case.
Key takeaways
- Battery: YT10L.
- Conventional (flooded, serviceable), around 160 CCA, 11 Ah.
- Lithium drop-in fits the same YT10L case - lighter, longer-lived, needs a lithium charger.
- Covers 1964-1966.
- Chemistry (OEM)
- Conventional (flooded, serviceable)
- Cold cranking amps (CCA)
- 160
- Capacity
- 11 Ah
- Engine
- 125cc
- Fits model years
- 1964-1966
The Yamaha YA6 uses a YT10L - conventional (flooded, serviceable). Around 160 CCA of cold-start current. Meeting or beating the OEM rating is fine; going under it can cause hard starts in the cold. About 11 Ah of capacity - the reserve that runs lights and electronics with the engine off.
AGM is the safe like-for-like: cheapest, tolerant of standard chargers and trickle tenders, and heavier. Lithium (LiFePO4) drop-ins in the same case size cut weight by roughly 60-70%, hold voltage better, and self-discharge far slower - but they cost more and need a lithium-aware charger, not an old lead-acid trickle charger.
Buy the battery for your Yamaha YA6
AGM is the safe like-for-like: cheapest, tolerant of standard chargers and trickle tenders, and heavier. Lithium (LiFePO4) drop-ins in the same case size cut weight by roughly 60-70%, hold voltage better, and self-discharge far slower - but they cost more and need a lithium-aware charger, not an old lead-acid trickle charger.
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Installing it
Disconnect the negative (-) terminal first and reconnect it last. Powersports batteries are small and light, so this is usually a 10-15 minute job with a couple of hand tools.
Frequently asked
What battery does a Yamaha YA6 take?
The Yamaha YA6 takes a YT10L battery, a conventional (flooded, serviceable) rated around 160 CCA and 11 Ah.
Is the YT10L an AGM or lithium battery?
Conventional (flooded, serviceable). You can also fit a LiFePO4 lithium drop-in in the same YT10L case size for less weight and longer life - just use a lithium-aware charger.
How many cold cranking amps (CCA) does it need?
Around 160 CCA of cold-start current. Meeting or beating the OEM rating is fine; going under it can cause hard starts in the cold.
Can I put a lithium battery in a Yamaha YA6?
Yes. Lithium (LiFePO4) drop-ins are made in the same YT10L case size, so they fit the tray and terminals. They weigh far less and last longer, but need a lithium-compatible charger rather than an old lead-acid trickle charger.
How do I change the battery on a Yamaha YA6?
Disconnect the negative (-) terminal first and reconnect it last. Powersports batteries are small and light, so this is usually a 10-15 minute job with a couple of hand tools.
Other motorcycles that take a YT10L
See every model that uses a YT10L battery →More parts for your Yamaha YA6
We cover the other consumables for your machine too - the exact fit, cited, in one place.